Yes, You can connect any operator's analog/digital feed to MyBox.

Note : To use analog feed you need the Analog & Digital MyBox (NV300T)

Yes, you can connect your TV's HDMI port to MyBox HDMI port, using a HDMI cable.

Setup: My Setup => System. Here you will have to change the "TV Out" to HDMI.

Continuous recording depends on you external storage device space. Size of the recoded video differs based on your recording settings.

Yes, you can record without Switching on the TV, but make sure your set-top Box is switched ON.

No. The MyBox remote can control your MyBox as well as STB. Connect IR Blaster to MyBox and place the IR emitter the set-top box. Select the operator in My Record => IR Blaster

Yes, you can Schedule daily/weekly recording and forget, but don't forget to watch it in your free time !

My Records => Schedule here you can Add/delete/Edit You Schedules.

The Shared data of a PC connected through a network can be accessed through MyBox. MyBox supports network and it is Wi-Fi enabled.

My Setup => Network => search Pc (This will list the connected PC in network).

SATA or SATA2 type HDDs are supported and it can be connected using the e-Sata Cable.

Yes you can listen to music without turning on the TV, but you need to connect a Surround system to your MyBox.

Connect MyBox device to the surround system and follow the instructions:

My Setup => Setup => HDMI AUDIO Output as Surround.

Yes, it is possible to run slide shows with music running in the background.

Note: Make sure you place your music files in the photos folder.

Directly PC can be connected to MyBox if it is connected through Crossover Ethernet Cable.

Yes, connect devices using USB data cable to MyBox USB Ports and recharge batteries.

Firmware upgrade doesn't require any special installation or Software it can be directly updated in the box using Internet.

Follow simple steps: Go to My Setup =>Advance => Enter Pin code=>Software Upgrade => set upgrade as Firmware and set Upgrade Using as Online=> Click OK.

Using MyBox you can rename files as well as you have the PC functions such as Cut/Copy/Paste files.

Follow Instructions: My Files => select the file => press "FN" key in the remote

Yes, Map the Input Source Remote keys to MyBox remote using My Setup => Record => IR Blaster option and use the same remote for both MyBox and Input Source device.

Yes, Press the "Setup" key to change the brightness and contrast.

Yes, create the folder name as "Record" in your computer and share the folder with full control.

Connect your PC to MyBox using a Hub in between or directly using a crossover Ethernet cable and follow the instructions given below.

My Setup => Network => Search PC and select the PC.

For recording the file directly: My Setup => Record => settings => Select "save as" option as PC.

Yes, Browse the torrent file using MyBox browser, select the file and press ok on it to download.